I have own lights, will Geeko kit support my lights?
The standard Geeko kit does not include light cables, but both headlight and rearlight sockets are reserved inside Geeko Bracket, you can easily extend the light function.
What are the requirements for the lights?
Voltage: 30V-54.6V
Power: Less than 30W each
What should I do?
- Loosen the 5 screws on the bottom of the Geeko Bracket with a screwdriver.
- Plug the light cable into the light socket of Geeko Controller.
- Connect the light cable to the positive and negative terminals of your light, taking care of the insulation so as not to cause a short circuit.

How to turn on/off lights?
Press and hold the “+” button on the Geeko Bottle for 3 seconds and you can turn the light on and off.
How long is the light cable?
The length of the female light cable to controller is 85CM.
The length of the male light cable to headlight is 65CM.
The total length of the light cable can be adjusted by adjusting the length of the male light cable.
Reviews
There are no reviews yet.