Geeko-Front Kits
| Geeko Model | Motor Power | Battery Case | Battery Capacity | Charger | Mileage in PAS mode at level 1(km)* | Mileage in throttle mode (km)* |
| Mini-25052F | 36V250W | Mini | 36V5.2AH | 42V2A | 65 | N/A |
| Mini-25070F | 36V250W | Mini | 36V7.0AH | 42V2A | 85 | N/A |
| Mini-35070F | 36V350W | Mini | 36V7.0AH | 42V2A | 85 | 28 |
| Prime-25078F | 36V250W | Prime | 36V7.8AH | 42V3A | 95 | N/A |
| Prime-35078RF | 36V350W | Prime | 36V7.8AH | 42V3A | 95 | 30 |
| Prime-25100F | 36V250W | Prime | 36V10.0AH | 42V3A | 130 | N/A |
| Prime-35100F | 36V350W | Prime | 36V10.0AH | 42V3A | 130 | 40 |
| Solid-25100F | 36V250W | Solid | 36V10.0AH | 42V3A | 130 | N/A |
| Solid-35100F | 36V350W | Solid | 36V10.0AH | 42V3A | 130 | 40 |
| Max-25150F | 36V250W | Max | 36V15.0AH | 42V3A | 200 | N/A |
| Max-35150F | 36V350W | Max | 36V15.0AH | 42V3A | 200 | 60 |
| Max-50100F | 48V500W | Max | 48V10.0AH | 54.6V3A | 130 | 40 |
| Pro-25150F | 36V250W | Pro | 36V15.0AH | 42V3A | 200 | N/A |
| Pro-35150F | 36V350W | Pro | 36V15.0AH | 42V3A | 200 | 60 |
| Pro-50100F | 48V500W | Pro | 48V10.0AH | 54.6V3A | 130 | 40 |
| Ultra-25200RF | 36V250W | Ultra | 36V20.0AH | 42V3A | 260 | N/A |
| Ultra-35200RF | 36V350W | Ultra | 36V20.0AH | 42V3A | 260 | 80 |
| Ultra-50150F | 48V500W | Ultra | 48V15.0AH | 54.6V3A | 200 | 60 |
| *Regarding the mileage, it is obtained under the following ideal conditions: flat road, no wind, 30 degrees Celsius, the rider’s weight is 60KG, the actual mileage will vary due to different conditions | ||||||
Geeko Front Motors
| Geeko Front Motor |
|
|
|
|
| Motor Model | MT-3625F | MT-3635F | MT-4850F | |
| Power | 250W | 350W | 500W | |
| Rated Voltage(V) | 36 | 48 | ||
| RPM | 290 | 350 | 450 | |
| Contruction | Gear Drive | |||
| Gear Ratio | 4.33 | |||
| Torque(NM) | 38 | 40 | 48 | |
| Weight | 2.5 | 3.3 | ||
| Diameter(mm) | 120 | 150 | ||
| Efficiency(%) | ＞80% | |||
| Cable & Connector | 9 pins waterproof connector | |||
| PAS Sensor | N/A | |||
| Spoke Holes | 36 | |||
| Brake | Disc brake or V brake | |||
| Installation Width (mm/OLD) | 100 | |||
| Max. Speed (KM/H) | 20″ | 25 | 29 | 38 |
| 26″ | 32 | 38 | 49 | |
| 27.5″ | 34 | 40 | 52 | |
| 700C | 35 | 41 | 53 | |
| Waterproof | IP65 | |||
| Certificates | CE | |||
Geeko Bottles
Geeko Batteries
| Model | Bottle Case | Capacity | Height(mm) | Diameter(mm) | Weight(kg) | Cell Type | Cell Brand |
| GB-36052-Mini-B3 | Mini | 36V 5.2AH | 222.5 | 76 | 1.25 | 18650 | DMEG |
| GB-36070-Mini-B3 | Mini | 36V 7.0AH | 222.5 | 76 | 1.3 | 18650 | LG/Samsung |
| GB-36100-Solid-B3 | Solid | 36V 10.0AH | 222.5 | 87 | 1.75 | 21700 | LG/Samsung |
| GB-36150-Pro-B3 | Pro | 36V 15.0AH | 222.5 | 104 | 2.55 | 21700 | LG/Samsung |
| GB-48100-Pro-B3 | Pro | 48V 10.0AH | 222.5 | 104 | 2.3 | 21700 | LG/Samsung |
| GB-36078-Prime-B3 | Prime | 36V 7.8AH | 292.5 | 76 | 1.8 | 18650 | DMEG |
| GB-36100-Prime-B3 | Prime | 36V 10.0AH | 292.5 | 76 | 1.8 | 21700 | LG/Samsung |
| GB-36150-Max-B3 | Max | 36V 15.0AH | 292.5 | 87 | 2.55 | 21700 | LG/Samsung |
| GB-48100-Max-B3 | Max | 48V 10.0AH | 292.5 | 87 | 2.3 | 21700 | LG/Samsung |
| GB-36200-Ultra-B3 | Ultra | 36V 20.0AH | 292.5 | 104 | 3.65 | 21700 | LG/Samsung |
| GB-48150-Ultra-B3 | Ultra | 48V 15.0AH | 292.5 | 104 | 3.55 | 21700 | LG/Samsung |
Throttle(For 350W and 500W kit)
Items Weight
| Items | Weight(KG) | |
| Battery | Mini | 1.3 |
| Solid | 1.75 | |
| Prime | 1.8 | |
| Max | 2.55 | |
| Motor Wheel | 250W | 2.6 |
| 350W | 2.6 | |
| 500W | 3.5 | |
| Controller | 0.5 | |
| Charger | 2A | 0.42 |
| 3A | 0.75 | |
| Throttle | 0.1 | |
| Phone Holder | 0.2 | |
Package
| Wheel | Package Size(CM) | Package Weight(KG) |
| 20″ | 50X50X25 | 9 |
| 26″ | 60X60X25 | 9 |
| 27.5″ | 60X60X25 | 9 |
| 28″ / 29er /700C | 64X64X25 | 9 |
Hi, will you be doing a thru axle option anytime soon for either front or rear motors?
Hi, regarding the thru-axle motor, we are already planning it and will start designing and developing it later this year. Thank you for your attention.
Hi, the GD01 is incompatible with old controller. The solution is to replace the controller with new version or replace the M3 display not GD01.
Please contact us by email and we will provide the suggestion about how to order it.
Hello,
I have a favor to ask:
1. I used an electric bike with the following set:
– BT-70 battery
– 100GV-FOC-Y02 SW controller: V106-20191024
– OMT-M3 display
– front engine CZLD08HC 100G36V250W
– PAS sensor BBSS12-L25-01.
2. Purchased at ZIBIBIKE Polska.
3. Now I have a new 100G GD01 display and unfortunately this display is not compatible with the 100GV-FOC-Y02 SW controller: V106-20191024.
3. Zibibike confirmed above and informed that there are no old displays. available.
3. Is it possible to purchase a display compatible with the 100GV-FOC-Y02 SW controller: V106-20191024.
hallo do you know where i can get PAS Sensor BBSS12-L25-01. mine is defect and i need replacement . thank you
Hello, you can go to our website to see if there is a PAS sensor you need.